W196R Pack 5 - Stage 17. Engine covers.

[Mark, The Master Modeller]

Stage 17 gives us the engine covers and a little more plumbing.

Put the engine front cover in place on the front of the engine.

This is secured with 2 screws fitted behind it.

Fit the inner side cover and secure it with 3 screws.

Now take the outer side cover and put it in place.  This is secured with 2 smaller screws.

The two oil hosed are fitted from the end of the inlet cam cover to the engine block.

Here's a close-up of the cam cover end.

And here's where they fit on the block.

I forgot to do it earlier, but I also refitted the magneto bracket.

This completes the stage.

 

[Sloucher]

@Mark, The Master Modeller, any further stages documented for this build Mark?

[Mark, The Master Modeller]

On 2/19/2025 at 11:32 AM, Sloucher said:

@Mark, The Master Modeller, any further stages documented for this build Mark?

Yes, there will be soon.  Some other work took priority unfortunately, but that's nearly finished then I can get back to this build.