Titanic Pack 15 - Stage 81. Start of the bridge deck.

[Mark, The Master Modeller]

Stage 81 sees that start of the bridge deck.

First, take the closing plate and screw in the opening in the bottom of the promenade deck.

It looks like this from the top.  The promenade deck can be set aside now.

The next task is to fit the self adhesive decking.  I've found that occasionally the self adhesive decking has curled up at the edges.  This isn't a problem on the promenade deck as either the superstructure will hold it down, or you can just run a little super glue under the deck if it's by the edge.  However, the outer edges of this decking will be inaccessible so I've pre-empted the possibility by putting a few small drops of superglue near the edges.

Now remove the backing paper and putthe decking in place.  Mine was a little tight on the width and needed a gentle pull to get it to fit.

This completes the stage.