Titanic Pack 11 - Stage 60. Entrance to Second Class Area.

[Mark, The Master Modeller]

Stage 60 gives us the entrance to the second class area.

You'll need the etched window frames that were supplied with stage 51.  Cut 7 of the larger frames from teh fret and glue them to the entrance housing.  Just use a tiny amount of super glue.  

You'll also need the white grilles that were supplied with stage 51.  Glue these to the large openings (air intakes?) in the entrance housing.

Glue the two side screens to the housing.

Peel the backing paper off the decking and stick this to the top of the housing.

Push the lift engine housing onto the top of the entrance.  I didn't need to glue mine.

Glue the two small vents to the top of the housing.

Glue the motor to the vent.  Keep this safely as it will be fitted later.

Take the two benches and glue them to the boat deck either side of where the entrance housing will be fitted.

This completes the stage.  I've just placed the entrance housing loosely on the deck for effect.