Administrator Mark, The Master Modeller Posted March 23 Administrator Share Posted March 23 Stage 17 gives us the left side of the engine block and we will fit the carbs. Take the left cylinder head assembly and screw it to the left side engine block. The carbs are trapped between the two cylinder heads. Make sure that you have the carbs the right way round. There are pins on one side of the carbs and they must face outwards when the distributor is to the left. Here's a close up showing the carbs fitted so you can see which way round they go. The instructions suggest removing the trumpets for the next step, but I found this unnecessary. Put the carbs in position against the left cylinder head, then put the put the right cylinder head in position. Screw the two halves of the engine block together. Here's the front screw. Here's the rear screw. This completes the stage. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.