Pack 12 - Stage 92. Fitting the rear licence plate and grill.

[Mark, The Master Modeller]

Stage 92 gives us the rear boot compartment and rear light lenses, but we fit the rear licence plate and grill.

We start by assembling the licence plate lights.  These were supplied in stage 90.  Remove any flash from the lenses then they just push on to the light bodies.  The straight edge of the lens faces towards the light body.  Be careful as they can be fitted the wrong way round.

Push the lights onto the rear body and secure them with screws from inside the rear body.

Take the 3 parts to the licence plate.

Push the plate into the mounting bracket.

Fit the trim.  Again, it's a press fit.

Next we need to fit the rear grille.

This is fitted from the inside and is secured with 4 screws.

It looks like this from the outside.

Take the licence plate assembly and fit it to the rear body.  It's secured with a couple of screws from the inside.

This completes the stage.