Pack 11 - stage 90. Fixing the boot lid.

[Mark, The Master Modeller]

Stage 90 gives us more of the rear lighting, but we fix the boot lid.

You'll need the parts supplied in stage 87, and the type T screws from stage 88.

Put the hinge in place on rear body.  They are not marked left or right, but they can only be fitted one way round.

Secure the hinge by screwing the bracket in place.

Repeat on the other side.

Put the boot lid in place and hold it with some strips of masking tape.  The yellow tape is well camouflaged by the yellow paintwork! 🤦‍♂️

Turn the rear body over and screw the hinges to the underside of the boot lid.

Remove the tape and check that the boot lid can hinge up easily.

Replace the masking tape and that completes the stage.