Pack 9 - Stage 67. Front cross bar.

[Mark, The Master Modeller]

Stage 67 gives us the front cross bar and some details, but we fit the front brakes.

If you haven't already done so, assemble the front brake discs.  The two halves push together.

Fix the steering arms (track rod ends) to the hubs with the type F screws supplied in stage 60.

Take the left inner brake caliper and press it onto the pins on the hub.  You could use a little superglue if the fit is a bit loose.

Put the brake disc in place.

Now push the caliper outer halve in place.

Repeat on the right hand side.

This completes the stage.