Jump to content

Recommended Posts

  • Administrator
Posted

Stage 48 gives us the forward first class stair case, which was a very grand affair.  We also get another light strip.

PB180347.thumb.JPG.6a305cae35ebb4f5ce12bcecec090d0e.JPG

First we fit the LED light strip.  This clips in.

PB180348.thumb.JPG.11f75203b5f271b92318253c6440ba9e.JPG

Fit the stair case to the bottom of the deck.  Three screws hold  it in place, and a pin locates in a hole to hold the other end secure.  No glue is needed.

PB180350.thumb.JPG.bdb6a6c70b058ec08cdbd13a402ccf53.JPG

Glue the staircase wall in position, but test fit it first.  I had to scrape some paint off the bottom of the wall to get it to fit properly.

PB180351.thumb.JPG.a83bff22e7e19acbea620f811a712bd2.JPG

Screw the two brackets to the wheelhouse bulkhead.

PB180352.thumb.JPG.430def1d83be0f4e3138eabd8129e06e.JPG

Take the funnel deck assembly and screw the wheelhouse bulkhead assembly in place.

PB180353.thumb.JPG.98156a0d808c80a3b4f477a1ed0d626f.JPG

Now we add a couple more photo etched window frames and a grill.  The frames were supplied in stage 22.  Glue these in place with a smidge of superglue.

PB180354.thumb.JPG.c43369a1aaaa2e288d21a3c6c6ef912f.JPG

The grill was supplied in stage 20.  Again glue it in place with a smidge of superglue.

PB180355.thumb.JPG.0a37d342275a915d404a619863483417.JPG

This completes the stage. 

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...