Jump to content

Pack 9 - Stage 69. Left chassis plate and fuel pump.

Mark, The Master Modeller
 Share

Recommended Posts

  • Administrator
Mark, The Master Modeller Power Contributor

Mark, The Master Modeller

Posted
  • Administrator
Posted

Stage 69 gives us the left chassis plate and the fuel pump.

EDIT: Do not glue any of the fuel or oil pipes at the moment.  Some of these will be replaced in a later Pack.

PB050303.thumb.JPG.2663d6319fd610565b3a428dc82fd881.JPG

Fit the fuel pump to its protective shield/mounting plate.

PB050304.thumb.JPG.e94706ddb1fff4d490e74fa26d5f563c.JPG

Fit this to the chassis plate.

PB050305.thumb.JPG.759e49e1b4adeae466e6129f0b25a184.JPG

Fit the braided fuel line to the fuel pump fitting using the connector.  

PB050306.thumb.JPG.c0c6f2115ca8bfbe76a145162e458946.JPG

Fit the fuel line connector to the pump.  This is just a push fit, but not that the fuel line is pointed away from the pump.  Be careful with this as the connector fits on a round pin and can point in any direction.

PB050307.thumb.JPG.3ec84d8bd4ff2c826ef341adbc25d312.JPG

This completes the stage.

PB050308.thumb.JPG.ab2d1c3ef631284a250ec96157380be2.JPG

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...