Jump to content

Pack 8 - Stage 64. Front left brakes.

Mark, The Master Modeller
 Share

Recommended Posts

  • Administrator
Mark, The Master Modeller Power Contributor

Mark, The Master Modeller

Posted
  • Administrator
Posted

Stage 64 gives us the from left brakes, but we assemble the front upper right wishbone provided in the previous stage.

PB050346.thumb.JPG.7a288d01ddd08010764611e4a21b1845.JPG

This stage is a report of the previous stage, so I'll be brief.

Fit the upper wishbone, securing it with the two supports and screws as we did in the previous stage.

PB050347.thumb.JPG.1f37ef376a4e9a8a1c2245a4e9d38110.JPG

Fit the torsion bar as before.  However, the hole in my front subframe was clogged up with paint and flash, so I had to drill it out with a 2mm drill bit.  It was a bit tight pushing the torsion bar pin into the hole, so a 2.1mm drill bit might be a better choice if you have one.

PB050348.thumb.JPG.e13a48a6cf968dab7f78e72186bd45fa.JPG

This completes the stage.

PB050349.thumb.JPG.b2296f4cb3d9c42b4e9b198692baa32b.JPG

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...