Jump to content

Pack 8 - Stage 62. Front upper wishbone.

Mark, The Master Modeller
 Share

Recommended Posts

  • Administrator
Mark, The Master Modeller Power Contributor

Mark, The Master Modeller

Posted
  • Administrator
Posted

Stage 62 gives us the front left upper wishbone, but we assemble the right lower wishbone provided in the previous stage.

PB050334.thumb.JPG.26113ea0ab2ba505f86c6799f6cc560e.JPG

This stage is a repeat of the previous stage, so I'll be brief.

You will need to sand the wishbone, wishbone brackets and shock absorber as you did in the previous stage so that the parts fit newly and rotate smoothly.  Then screw them together.

PB050335.thumb.JPG.0fd5b7af365029aebaf42c87719b5c8f.JPG

Push the wishbone brackets into the holes in the front subframe and secure them with two screws.

PB050336.thumb.JPG.2cccdd855cf731512f1dd7d47f2aab2f.JPG

Secure the top end of the shock absorber to the reinforcing bar with a screw.  Do this for both front shocks.

PB050337.thumb.JPG.bc440c4da825b89d04174265f0b5ab8e.JPG

This completes the stage.

PB050338.thumb.JPG.8e4d0fbac372d5add3faff6ac4fc4827.JPG

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...