Jump to content

Shelby Cobra Pack 2 - Stage 15

Recommended Posts

Stage 15, spark plugs:



To start, I screw the oil pan on to the protective plate. Then I screw two screws on to the lugs, as these hold the protective plate in place when slotting into the egine:



Next, I screw another 2 screws on to the engine, which act as slots when joining on to another piece. Also I place cooling fluid tank bracket in the engine:



Next, the timing belt assembly, gearbox assembly and oil pan come together ready to be held in place by the engine block:



Everything comes together with some screws. I had to use a slightly longer screw driver for this part:



Now on to the spark plugs. I cut the long piece of wire into the lengths given in the instructions. Then I take the sparkwire connectors, and press them on to the end of each piece of wire:



Fibally, I press the spark plugs into the engine block with some pliers, to make sure they are in firmly. Then the wire goes from the spark plug and into the distributor:


Stage complete

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...