Administrator Mark, The Master Modeller Posted April 14, 2023 Administrator Share Posted April 14, 2023 Stage 52 gives us the passenger door panel. Fit the light switch housing to the door. Push the microswitch in place. I found that there was a bit if flash on the end of the silver plastic bar (fitted last stage) which was causing the microswitch to be permanently closed. I trimmed the end of the silver bar with a sharp knife and now get a nice click when the silver button is pressed. You only want to remove the minimum amount or the switch may not operate when the door is closed. Feed the cable under the sliver door switch and through the hinge. Fit the chrome plastic panel with a 4 screws. The black panel will be fitted later. This completes the stage. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.