Jump to content

Pack 6 - Stage 40. Ignition coils, brake lines and another bit of chassis.

Mark, The Master Modeller
 Share

Recommended Posts

  • Administrator
Mark, The Master Modeller Power Contributor

Mark, The Master Modeller

Posted
  • Administrator
Posted

Stage 40 gives us the rear chassis cross member, coils and brake lines.

P3050834.thumb.JPG.d7f3b547c0fabb7d541be6310a7cf83e.JPG

Fit the HV cables onto the coils.

P3050835.thumb.JPG.a2c3a1b5ce077d8df7d8f9dedebab1cd.JPG

Now fit the coils to the chase cross member.

P3050836.thumb.JPG.bf61c0ba7a75464d2c50d77722db766c.JPG

Now fit the cross member to the chassis.  You'll need to spring out the right side frame a little.  Once it's in place you can secure the cross member with a couple of screws.  You can also screw the side frame to the right hand engine mount.

P3050837.thumb.JPG.55879c80963cd568dc90f63d6e50000f.JPG

The two HV cables are connected to the distributor.

P3050838.thumb.JPG.bcf88e74f53452b47f22e9d6d0b0a73e.JPG

Take a shorter and a longer brake line and connect them together with a connector.  Make 2 sets.

P3050842.thumb.JPG.4be6c5dbcbc21c56bf0d09835c612078.JPG

Push the connector into the hole in the chassis.  

P3050844.thumb.JPG.79e0816c9f02d5c139fb6564eed68301.JPG

This completes the stage.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...