Pack 5 - Stage 35. Coolant reservoir.

[Mark, The Master Modeller]

Stage 35 gives us the auxiliary coolant reservoir.

Push the two halves of the tank together.

Push the fitting onto the front left of the sub-frame.

The coolant tank pushes onto the top of the rear sub-frame.

The horizontal pipe fits on the right hand side of the sub-frame.

The vertical pipe fits in the hole in the rear of the sub-frame top section.  Mine was a bit loose so I glued the pipe in place.

The bottom of the pipe sticks out to the right of the silencer.

This completes the stage.