Administrator Mark, The Master Modeller Posted December 28, 2022 Administrator Share Posted December 28, 2022 Stage 72 gives us the right front wing and right indicator. Fit the indicator lens with a couple of small screws. Put the right headlamp assembly in position in the bonnet. Note how the wall on the bonnet fits int eh gap between the headlight housing and bracket. The slots in the mounting bracket should line up with the screw holes in the bonnet. Add the wing, noting how the wall slots in the gap between he headlight bracket and housing. Screw the wing to the bonnet with 3 screws. Fix the headlight to the bonnet with 2 screws and add a further screw to fix the headlight housing to the front of the wing. Push the headlight LED and the indicator LED into the relevant holes. I taped the wires down with a piece of masking tape to save me snagging the wires. This completes the stage. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.