Administrator Mark, The Master Modeller Posted August 10, 2022 Administrator Share Posted August 10, 2022 Stage 98 gives us yet more buttons. These control the engine start/stop, lights, smoke and machine gun. Fit the buttons to the board. Note that the semicircular parts to clear the screw posts go the the edge of the board. Screw it into the control unit. It looks like this from the front. Put the glass in place if you didn't fit it in stage 92, or you've put it to one side when it fell out! Fit the LCD screen. Be careful with this as it's delicate, and don't forget to remove the protective film by pulling the yellow tab. It just drops in place. The TV receiver aerial goes under the button circuit board. Fit the three cables that were supplied in stage 94. Fit the power cable from the control unit back. Fix the back with 4 screws. The completed remote control unit looks like this. That completes the remote control unit, so it's time to buy some batteries!! That also completes this stage. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.