General Lou Posted April 3, 2020 Share Posted April 3, 2020 Stage 19, left rear wheel housing liner: First step is placing the wheel housing liner onto the frame and screw it on with 3 MD06 screws: Stage complete Stage 20, left leaf spring: I put the front shackle onto the leaf spring on the side closest to the hole in the middle and pin it in with some pliers. Then I do the same thing for the rear shackle: The leaf spring now goes under the car and over the axle. Make sure the hole on the leaf spring is over the axle like the picture, then flip it over and screw it in with 2 MP01 screws: Next i place the spring plate over the four pins on the axle and screw in with 2 MP05 screws: Stage complete: Quote Link to comment Share on other sites More sharing options...
wIPILLILY Posted December 5, 2021 Share Posted December 5, 2021 At this stage, you can decently modify the rear axle and suspension. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.