Mark A Posted September 22, 2023 Share Posted September 22, 2023 (Note; since the next steps are handed versions of the same parts, I assembled them assembly line style, resulting in only 1 set of pics) Start by adding the lower left control arm to the knuckle (hub) and secure with a TM screw. Then locate the upper control arm and part of a U-joint. Fit the u-joint into the control arm and fix with a RM screw. Pay attention that you are using parts stamped with an “L”! In steps 4a and 4b, you’ll mount the knuckle to the upper control arm using 2 AM screws to fix it into place. Lastly, you’ll add the brake drum cover. The cover snaps into place, needing no screws. Steps 8-11 repeat for the right control arm Step 12 adds the brake drum to the wheel we assembled in stage 25. Fix the drum with 2x PM screws. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.