Pack 3, Stage 16

[Mark A]

Pack 3, stage 16, preparing the chassis.

This stage has us start the front part of the chassis. Included in stage 16 is the front part of the frame, 2 brackets, a “bypass” and 2 lengths of hose along with the usual screws.

We start with the two brackets. The orientation on these is a bit difficult to figure out, and it took me a bit of trial-and-error fitting before I figured out how they were supposed to fit. Use 2x AM screws to secure the brackets to the chassis.

Next up is the bypass. There is only 1 way this will fit on, and the hoses need attention to be placed properly. The short hose is placed on top, while the longer hose exits the right side of the bypass.

Not much to this stage as we are done already!