Pack 8 - Stage 61. Driver's seat.

[Mark, The Master Modeller]

Stage 61 gives us the driver's seat.

Take the lower safety belt and pass it through the slot in the driver's seat.

The loop of the safety belt goes behind the seat like so.

Fold the buckle over.

Now push the buckle lock over the buckle.

Secure the loop of the belt with a couple of pieces of tape.

Fix the seat base with a couple of screws.

Take the upper belt and tape it in position on the underside of the seat base.  Note that the tape must stay at least 2mm away from the screw holes.

Fit the seat adjuster into the hole in the seat base.

Mount the seat to the chassis with two screws.

This completes the stage, although a piece of masking tape will help tame the seat belts for now.