Pack 8 - Stage 60. Battery and gear selector.

[Mark, The Master Modeller]

Stage 60 gives us the battery and the gear selector.

Push the battery cables onto the terminal lugs.

Screw the terminals to the top of the battery with a couple of screws.

Push the bottom of the battery in place.

 

Push teh battery cover over the top of the battery terminals, shame though it is to hide the details!

Clip the battery strap in place.

The bottom of the clips should locate like this.

Push the completed battery onto the posts on the chassis, just in front of the fire wall.

Push the battery cables onto the pins on the firewall, just below the ignition box.  You may need to shorten the cables a little.

Take the gear lever and the gearbox rod.

Push them together.

Feed the gearbox rod through the hole in the firewall, just above the fire extinguisher.

Feed the rod back through the inside of the chassis and then push it onto the gear support (part 53E).

Push the gear level into the hole in the chassis, on the right hand side of the cockpit.

This completes the stage.