mikedm Posted October 22, 2021 Share Posted October 22, 2021 UPDATE I had to disassemble the chassis from the body cause I found the #6 and #9 wires were crossed and things didn't work correctly, major pain in the butt because of all the connector plugs on the wiring. Finally came apart and found the problem, then decide to remove all the short jumpers on the wire cables and with some very careful tucking of the wires and remaining connectors, the chassis just literally dropped into place without any pushing or squeezing of the body and chassis together. SO, IF YOU ARE VERY CAREFUL, DO WHAT I DID AND YOU WON'T BELIEVE WHAT HAPPENS.... Quote Link to comment Share on other sites More sharing options...
john hunter Posted October 23, 2021 Share Posted October 23, 2021 I had a similar problem except I removed 05 extension cable as the engine noise was on constantly and no horn sound either but removing said cable all my electrics work fine. Also the rear lights connectors I had to tuck away as they just stopped the rear end from dropping into place. Your pics look superb. Quote Link to comment Share on other sites More sharing options...
mikedm Posted October 24, 2021 Author Share Posted October 24, 2021 Thank you John Hunter.......if they would make mods themselves to the kit with the necessary additional items people have remarked about, they would have an outstanding kit for detail.......will admit this really turned out nice and I enjoyed it. A little leary about doing the Snake after reading all the feedback people have posted. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.