Pack 7 - Stage 54. Cockpit bulkhead.

[Mark, The Master Modeller]

Stage 54 gives us the cockpit bulkhead.

Push the red and blue wires into the appropriate holes in the bulkhead.  They are a friction fit, but I decided to add a tiny drop of superglue in each hole, jus too be sure that they won't fall out.

Push the voltage regulator in place.

Turn the bulkhead over and trim the wires flush with the bulkhead.

Fit the left tubular frame in place.  This is a push fit.

Repeat with the right tubular frame.

This completes the stage, and the pack.  However, I couldn't resist trying the bulkhead in place!