Pack 7 - Stage 55. The front frame, but we continue fitting the rear window.

[Mark, The Master Modeller]

Stage 55 gives us the front frame and steering column, but we fit the rear window to the central body section.

Fit the rear window assembly to the cross frame firewall with 3 screws.  

`fit this rear frame assembly into the central body section.

Make sure the interior light cable comes out the top left corner of the body as shown.

The holes in the frame fit over posts in the central bodywork.  One each side.  

Secure with 2 screws once it's properly located. 

Now the interior light cable needs to come down the side of the window and back into the body.

You'll need to unscrew the end of the window frame to get the cable through the hole.

It will look like this from inside the body.

This completes the stage.