Pack 12 - Stage 97. Bonnet under-panel.

[Mark, The Master Modeller]

Stage 97 gives us the bonnet under-panel and we fit the front bumper and the underside of the car.

Take the three front bumper parts, supplied in stages 23, 95 & 96.  Screw them together with the small AG09 screws.  Leave these screws just loose enough so that the parts can move with little friction.  It makes it harder to fit them if they are screwed tight.

The view from the front.  Make sure you got the Jag logo the right way up!

Fit these to the under-panel and fix with 4 screws.

It should look like this from the front.

Press this assembly into place.  It's a firm press fit.  Support the bonnet as you don't want to put any pressure on the windscreen as this may damage your model.

Fit the chassis sub-frame in place and secure with 10 screws.  Note that the two front screws are AM01 type, and the rest are AG06.  

Make sure the wires are all laying flat and are not covering any screw holes.

This completes the stage.