Jump to content

Pack 4 - Stage 23. Distributor cap and plug leads 2.

Mark, The Master Modeller
 Share

Recommended Posts

  • Administrator
Mark, The Master Modeller Power Contributor

Mark, The Master Modeller

Posted
  • Administrator
Posted

Stage 23 gives us the second batch of plug leads and the second distributor cap.

PC200250.thumb.JPG.a7e9c89c48d2fcf99866a84fdfb3be6b.JPG

Assembly is exactly the same as stage 22, so I'll be brief.

Fit the distributor cap and its base together with a screw.

PC200251.thumb.JPG.cd006a96dbcc220e30d23db7eebfbaed.JPG

Cut the plug lead connectors from the sprue with sprue cutters and push them into the holes in the distributor cap.

PC200252.thumb.JPG.779f68c196324356532ea9206e813038.JPG

Push the distributor cap onto the distributor, being careful to align it as per the photo in the instructions.

PC200253.thumb.JPG.b05c49fc922c43e929979d6ea9f16b70.JPG

Fit the first set of 6 plug leads.  I suggest gluing these as they pull off quite easily.

PC200254.thumb.JPG.2aa1fffb91777aa28e94fd6e3ef8ec4f.JPG

Followed by the second set.  

PC200255.thumb.JPG.82e85e80b273d5e4c9caa628e7381e10.JPG

This completes the stage.,

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...