Jump to content

250 GTO Pack 5 - Stage 31. Front right wheel 2.

Mark, The Master Modeller
 Share

Recommended Posts

  • Administrator
Mark, The Master Modeller Power Contributor

Mark, The Master Modeller

Posted
  • Administrator
Posted

Stage 31 gives us the second set of parts for the front wheel.

P8120015.thumb.JPG.5fbe8db367ccfe9885ccd53d58635c82.JPG

This row of spokes are fitted into the remaining holes in the bottom row of holes in the hub.  The first spoke is highlighted in red.

P8120016x.thumb.jpg.9b21639862b49da7f944abead7f20ded.jpg

This is the top view showing the line of the spoke more clearly.

P8120017x.thumb.jpg.33a095e155eb3bb00092f52dfcc0b3a6.jpg

Carry on to complete the row of spokes.  You can hold them with a drop of PVA glue if you didn't use double sided tape.  You can get away without using glue at all if you have a steady hand!

P8120018.thumb.JPG.7a32b694204a49212c44549b6cacdeef.JPG

Fit the second spoke retainer ring and screw it in place.  Check each spoke to make sure none have jumped out of position.

P8120019.thumb.JPG.2a4d6a11b6a128121cbc1ded6037ce2e.JPG

This completes the stage.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...