Pack 2 - Stage 14 right carb (1)

[Mark, The Master Modeller]

Stage 14 gives us the first half of the right hand carburettor.  

Take the 2 supporting pins and lace them in the holes in the main carb body.

From the three intake manifolds, take the two similar ones, (with 2 grooves in the flange) and push them onto the carb body.  They go on the outer pins.

Now push the 3rd manifold on the centre pin.

Take the three shim plates and place them in position.  N one that the bolt heads face the carbs.

Now push the velocity stacks in place.  Be careful as the mesh is quite delicate.

Fit this to the right cylinder head.

This completes the stage.