john hunter
-
Posts
87 -
Joined
-
Last visited
-
Days Won
8
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Posts posted by john hunter
-
-
On 8/28/2022 at 4:04 AM, Ajacobi said:
I’m having the same issue, I just found my wire for the plug was damaged so I’m replacing it right now but I’ll keep in touch if it doesn’t fix my problem
Voltage is approx 5v.
-
14 hours ago, Ajacobi said:
Isn’t it only able to go in one way?
Check the connections as Mark stated, mine was incorrectly manufactured and didn't operate as it should until I replaced it.
-
Do you have the extension cable for the test board?
-
Hi, Parts 85-02 and 85-03 were incorrectly wired so basically check that the 2 parts use the same 4 connections 1,2,4,5, 3 is unused.
-
Hi all, does anyone have any recommendations to buy an acrylic cover for the Zero display stand?
- 1
-
Has anyone started pack 12 and noticed that the power connector has been incorrectly wired so that the aircraft will not fully function?
-
-
-
-
You could power up the motor and set them as you want also. I test both motors before installing them. Very well noticed though with regard to the instructions.
- 1
-
Hi, Yes I received the exact same part and informed Agora so I am expecting the other base board with pack 10 soon. I presumed it was a packing error.
-
On 3/10/2022 at 6:35 PM, nitropup55 said:
It's been a while since I have received any parts for the Zero. Is anybody else having this problem? The last pack I received was Pack 8, and that was like three months ago. Any thoughts?
Send Agora a message via your online account.
-
On 2/28/2022 at 4:56 AM, A6M5 said:
Hi John, seems you have an entirely different test set that attaches with the battery pack . Mine comes with a board with lights and an adaption wire. Also, my guns were solid plastic with no fiber cable. I drilled a couple on mm to give the gun barrels some depth.
This is what I use to test the LED's and motors and cannons.
-
Definitely do not use any drill as they are fiber optics and you will damage them. Connect the guns/cannons to the test board LED socket and switch on. Check out my build on YouTube John's model making....https://www.youtube.com/c/JohnsModelmaking
- 1
-
I have
tested all my lights, cockpit, nose guns and 20 mm cannons all shine at the tip. They look black due to the material they are made from, fiber optic. The landing gear can be fiddly and I have checked with a multi meter that the switches operate but i would like to test the function before covering them. -
Hi, What I love about this build is the intricate detail of the engine and the near perfect propeller rotation. Follow the link to view a short video on YT.
-
-
Thanks for the advice.
-
Hi all, patiently waiting for pack 4 of the Zero to arrive, probably next week now which is a disappointment. Any lessons to learn from anyone who has assembled pack 4?
-
I had a similar problem except I removed 05 extension cable as the engine noise was on constantly and no horn sound either but removing said cable all my electrics work fine. Also the rear lights connectors I had to tuck away as they just stopped the rear end from dropping into place.
Your pics look superb.
-
-
Well spotted. A mod maybe?
-
-
I hope that any changes/mods are good for everyone and its a pity Agora don't provide a magazine with all the historical content that Hachette published.
Help with pack 12
in Zero Chat
Posted
One of your cables insulation looks to be damaged? Is it broken?