john hunter
-
Posts
87 -
Joined
-
Last visited
-
Days Won
8
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Everything posted by john hunter
-
One of your cables insulation looks to be damaged? Is it broken?
-
Voltage is approx 5v.
-
Check the connections as Mark stated, mine was incorrectly manufactured and didn't operate as it should until I replaced it.
-
Do you have the extension cable for the test board?
-
Hi, Parts 85-02 and 85-03 were incorrectly wired so basically check that the 2 parts use the same 4 connections 1,2,4,5, 3 is unused.
-
Hi all, does anyone have any recommendations to buy an acrylic cover for the Zero display stand?
-
Has anyone started pack 12 and noticed that the power connector has been incorrectly wired so that the aircraft will not fully function?
-
Pics of the base after pack 11. All the lifting devices work and I checked the limit switches with a multi meter.
-
Pics are after pack 11. I love the canopy.
- 1 reply
-
- 1
-
-
Hi, I have added some pics of the fuselage and vertical stabiliser. The gap is actually green paint as you can see there is no gap further up the fuselage. The stabiliser looks fine and central, in the video the weight of the plane makes it lean to the left so I have balanced it in the picture.
-
You could power up the motor and set them as you want also. I test both motors before installing them. Very well noticed though with regard to the instructions.
-
Hi, Yes I received the exact same part and informed Agora so I am expecting the other base board with pack 10 soon. I presumed it was a packing error.
-
Send Agora a message via your online account.
-
This is what I use to test the LED's and motors and cannons.
-
Definitely do not use any drill as they are fiber optics and you will damage them. Connect the guns/cannons to the test board LED socket and switch on. Check out my build on YouTube John's model making....https://www.youtube.com/c/JohnsModelmaking
-
Radial engine and propeller action.
john hunter replied to john hunter's topic in Members build diaries
I have tested all my lights, cockpit, nose guns and 20 mm cannons all shine at the tip. They look black due to the material they are made from, fiber optic. The landing gear can be fiddly and I have checked with a multi meter that the switches operate but i would like to test the function before covering them.
-
Hi, What I love about this build is the intricate detail of the engine and the near perfect propeller rotation. Follow the link to view a short video on YT. https://youtu.be/JCLdyg5ZFwU
-
Hi, When do we get to test the landing gear motor? Can I test it before installing the motor?
-
Thanks for the advice.
-
Hi all, patiently waiting for pack 4 of the Zero to arrive, probably next week now which is a disappointment. Any lessons to learn from anyone who has assembled pack 4?
-
I had a similar problem except I removed 05 extension cable as the engine noise was on constantly and no horn sound either but removing said cable all my electrics work fine. Also the rear lights connectors I had to tuck away as they just stopped the rear end from dropping into place. Your pics look superb.
-
Readjusted the fuel pipe into the correct position.
-
Well spotted. A mod maybe?
-
What an absolute beauty this car is. Only 1 issue with pack 12 the cable 05 extension was removed due to a fault with the engine noise playing constantly other than that the pictures I have uploaded give a sample of its beauty.
-
I hope that any changes/mods are good for everyone and its a pity Agora don't provide a magazine with all the historical content that Hachette published.
