Pack 7 - Stage 54. The battery and starting to fit the rear window.

[Mark, The Master Modeller]

Stage 54 gives us the battery, but we work on the rear window.

First of all, take the sticker sheet supplied in stage 53 and cover the screw heads showing in the head lining.

A pair of tweezers makes this easier.

Press the stickers down firmly.

All four screws nicely covered.

The rear window is fixed with pre-cut strips of double sided tape.  There are two sheets which are identical so I assume one is a spare.

Stick the strips to the window frame.  The curved strips go left and right, and the rest are straight for the top and bottom.

Peel the protective film off the window.

Remove the backing paper from the double sided take and press the window in position.  The matt black window edge should face outwards.

This completes the stage.