Pack 7 - Stage 37. The Motor.

[Mark, The Master Modeller]

Stage 37 gives us the electric motor to drive the engines and props.

Fit the motor to the gearbox.  In order to do this you'll need to rotate the gearbox by inserting a shaft and twisting until the motor shaft will drop into the D shaped hole in the gearbox.

Make sure that the motor is fully inserted.  The brass reduction gearbox must be completely inside the gearbox cover.

Thread the cable through the motor housing.

Screw the cover in place.

Now thread the cable through the base.

Screw teh base in position.

Insert the turbine shaft.

This completes the stage.