Pack 6 - Stage 30. Starboard engine part 4.

[Mark, The Master Modeller]

Stage 30 gives the the base of the stbd engine.

Fit the catwalk to the bottom the frame.  The ladders go nearest the flywheel.  Use 4 EM screws and note that they go in the outer most holes.  

Fit the base to the bottom of the catwalk.  This is secured with 4 FM screws where they go through into the metal frame, and 6 AP screws where they bolt to the catwalk.

Fit the four exhaust valves, gluing them in necessary.  

Glue the end plate tot he engine base with superglue.  It fits not eh opposite end to the flywheel.

This completes the stage.