You have several options: 1. cut the wire, reverse it, splice and spot solder it, then heat shrink with electrical tubing to seal the splice and solder. Then test. 2. Cut the red and black wire where it connects to the plug so that both wires are separate, use a sharp exacto knife. Then tug gently on the black, then red wire. If one pulls out, the plug is broken. I would splice the wire so more copper shows and stick back in the plug, try to get a drop of solder into the plug with the wire already inserted. Then test 3. Best course of action, ask for a new part. Agora is good about that. I'm on Pack 5, but have to replace the travel switch in Pack 4 for the main landing gear due to a wire breaking off. The spot solder and wire broke while trying to install it. I soldered back, but asked for a new one as that is a no fail point (not having the landing gear not rotate. after the wing is built.) Hope this helps.