Beamerboy
-
Posts
51 -
Joined
-
Last visited
-
Days Won
4
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Posts posted by Beamerboy
-
-
Nothing stupid about it, @DaneMB - that's what the forum is all about! I was initially nervous about filing, as all other parts have fit perfectly, and I didn't know for sure if I would ruin the surface. There are lots of plastic bits on sprues in Pack 3, which could screw up their finishes if badly filed.
-
7 hours ago, YeepYeep said:
Use a small file or sandpaper.
Just a few milimeters to break the edges.
Yep; same thing I did. Haven't received Pack 3 yet myself. Noticed it during test fitting back on Stage 17 and mentioned it in General Lou's official build diary. Open up the slot on the left faceplate.
-
I'd recommend doing a test-fit of the faceplate (Part 1-1) once both sides of the head are attached to the top (Stage 17-3). It turned out that, for me, the slot on the left side of the faceplate was too narrow to fit snugly to the notch on the left side of the head. Required a little filing to open it up a bit. I'm sure you'll appreciate it if you do this now, rather than discover it later.
-
1
-
-
So, General Lou, does that mean that the elbow joint hex screw remains accessible and we don’t have to get the joint tension perfect before inserting the last elbow part? Good if true, as World of Wayne suggested we get it as desired now, or else!
-
I'm happy that you are going with stickers (rather than decals) for the printed detail on parts but have you considered including a spare duplicate sheet to assist those who may get their first attempt wrong? This is more difficult than what other modelmakers offer (stickers already applied) and yet would not be offering any better remedy than the 'spare screw'. I already have MANY spare screws after only 2 packs of the T-800 because I don't lose them, but sticker placement is trickier to make look right and, if stuffed up, could use a ready replacement.
-
OMG, that is amazing authenticity when you consider that no other vehicle would ever have been fitted with these 'test' tires/tyres! Might as well throw out the mold/mould when you get all the Super Snakes made!
-
1
-
-
On 6/30/2020 at 7:29 PM, airb said:
Hi to all the users of this Agora forum,
I was thinking, maybe it's an idea to bring a Cobra Daytona.
The Daytona is one of the most iconic racing cars of America,
the only U.S. car who has won at Le Mans, and with this coupe the Shelby
Cobra circle is almost round, GT 500, Cobra 427, just missing the GT 350
and the Cobra Daytona Coupe.
I fear going with that too early on may result in Agora being thought of as "The Shelby model makers" only.
-
So, Pack 2 of the Terminator T-800 was still sent from the UK; but you know what?:-
- Agora sent me the tracking code from Royal Mail on 15 June
- The tracking code was available in the Auspost app, so I could follow it like all my usual Australian shipments
- The pack was delivered on 25 June; so just 10 days to be shipped from UK to Australia at no charge (as promised at signup for Australian customers)
- The contents were intact and not obviously damaged by the distance travelled
It's taken longer than that to get a delivery of wine from the same State in this country lately. I can only commend Agora Models for ensuring that subscribers get their packs shipped regardless of the intended source warehouse during this pandemic. Can't be cheap to do, but these are the sort of promises that led me to go 'all-in' on subscribing for an expensive project as a diversion from all the chaos in the world.
And now to hear that Agora are looking at strengthening their shipping boxes where other postal services treat them badly, I'm happy to leave the decision of which country ships my next T-800 Pack for Agora to choose. I feel they've got my back (you do, don't you?).
-
Looks great to have the jaw connector parts installed. Do you have a preferred method of the two mentioned, General Lou?
-
On 6/4/2020 at 1:33 PM, Beamerboy said:
Thanks for this suggestion, Mark. I've been able to find an Australian distributor of Draper tools, and an in-stock supplier for the driver set on eBay. Currently have an offer in to buy at Recommended Retail - awaiting response.
Latest update - I bought the Draper tool 6-piece Extra Long Precision set via Ebay for around AUD $24, even though the product is available in Australia at a Recommended Retail of AUD $11.31. Suppliers don't keep it in stock much, and shipping from the distributors makes it more around what I've had to pay. More angst than it's worth to try chasing up the product at RRP.
-
Hi folks,
Thing to remember is that the selection of charging option is important to getting value out of your subscription to the T-800 Terminator.
For me, selecting to pay by my Australian Visa card for the AUD subscription resulted in a 3% foreign fee (even though the charge was in AUD). This is a peculiarity with Westpac Bank credit cards, and nothing directly related to Agora. However, if I choose to pay through PayPal and have PayPal deduct the charge through the same Visa card, I can avoid the 3% foreign supplier surcharge.
My advice is just to be savvy - with Agora offering PayPal as an option for the subscription payments, you may be able to save yourself a surcharge to your project and spend the same amount as budgeted for from Agora's asking price.
So glad to have these supported payment options in Australia!
-
Yeah, I reckon the Robocop would be a fantastic build.
If not, ”there will be………trouble .“
Although, it would have to be in 1:2 scale to match the T-800 display.
-
13 hours ago, tinkertoo said:
From what I have seen of other builds, this driver should be more than fine: https://www.amazon.com/gp/product/B0001P18LO/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
BUT if you really want one that is 90+ mm in shaft length, here it is: https://www.amazon.com/gp/product/B07X44WGRC/ref=ox_sc_saved_title_6?smid=A24JGA3DO5B17D&psc=1 These are 100mm long.
Thanks, tinkertoo but I have heaps of options for shorter length ph00 drivers (and one in current possession), so that wasn't the question. As to the second idea of long length socket driver bits, I can't imagine that a set of ¼" socket bits was what was intended as the addition to my model-building collection suggested by the expert tip in the Build Guide.
-
10 hours ago, Mark said:
This set may be even better. They quote a length on 100mm for a PH00 driver.
Sorry it's the UK site, but I'm sure you can find the same product from a local supplier.
No Australian suppliers found for Silverline tools. Shipping costs or delays from UK don't make this option viable.
-
10 hours ago, Mark said:
Something like this should do the trick, although Draper are not high end tools. Search for Jewellers screwdrivers for alternatives.
Thanks for this suggestion, Mark. I've been able to find an Australian distributor of Draper tools, and an in-stock supplier for the driver set on eBay. Currently have an offer in to buy at Recommended Retail - awaiting response.
-
Need some advice here
I'm assembling the T-800 Terminator, which is primarily put together with super glue and PH00 screws. In Pack 1 on page 8, there is an expert tip, which suggests getting a PH00 screwdriver with a shaft length of at least 90mm. Where can I find one of that dimension???
I've run through many Australian hobby shop websites, and searched through eBay and Amazon.com.au - really only finding shaft lengths up to 50mm in the ph00 size, and only one supply of a driver about 170mm long which costs HEAPS (which needs to be shipped out of China). Most driver sets only go as small as PH0, which doesn't work. I've also tried socket drivers with extension bars, but that doesn't fit for Pack 1 Stage 4 Step 3.
If the recommended driver can't be easily sourced in Australia or other localities worldwide where Agora is making their kits available, then can we provide pointers to where the recommended screwdriver can be procured?
-
Hi General Lou,
Do you believe that it is superglue (rather than anything else) that is required to perform an adequate join on the materials mentioned in the build instructions?
-
On 5/28/2020 at 9:51 AM, CSM666 said:
Anyone ordered from Canada?
Mine says it left the UK on May 16th - when I track it on the Royal Mail website it tells me to use the same tracking number on the Canadian post website but this is all it says for me :
MAY 16 4:56 PM
INTERNATIONAL ITEM HAS LEFT ORIGINATING COUNTRY AND IS EN ROUTE TO CANADA
GBLALA, UNITED KINGDOM
MAY 15 6:25 PM
INTERNATIONAL ITEM MAILED IN ORIGINATING COUNTRY
EXETER MC, UNITED KINGDOMHasn't moved since... and also I really hope there are no extra tax charges. 🤮
So excited to get started on this, I like check the tracking every day lol
You don’t say you’re checking the Canadian website for tracking your package. Have you tried https://www.canadapost.ca/cpc/en/home.page ?
I suggest this because I’ve been sent pack 1 to Australia, and the tracking code given by Agora works well on the Australia Post site. In fact, my pack is due to be delivered today! Currently drooling at the mouth in antici………pation.
…and now (4 hours later than my post) it has arrived! 😎 The backs of Stages 1 & 2 were coated in the residual adhesive from the original Hachette backings, and mostly stuck to the advisory sheet. It got all over my hands, and then parts of the other Stage packs. The poster seems OK, and I hope that this won't be happening in future Packs - it wasn't the best start to this experience, but I am eager to see it through..
-
What plate number did you go for? Congrats on jumping in on this model!
-
17 hours ago, Dima$ said:
I am sure that this is Shelby AC Cobra. A great choice for further assembly! I will definitely collect this model!
After looking at the gallery of the Agora visit to Shelby Heritage Center, I have to agree with @Dima$ that it will be a Shelby AC Cobra.
-
1
-
-
I’m going for an historic F1 car - likely the Senna McLaren MP4/4. Based on the current ‘wheel’ picture replacing the sheeted vehicle.
-
14 hours ago, General Lou said:
Pack 1 has been shipped. You should have a tracking number, if not contact customer support.
Pack 1 is coming from the UK due to Covid-19. Hopefully pack 2 should be shipped from Australia.
Customer Support gave me the Tracking Code - now for the bittersweet experience of watching it wend its way Down Under. 🌍🛫🛬🌏
-
Hi,
I noticed on Facebook that Pack 1 of the T-800 was to be shipped out this week. Is that the same for Australian members and, if so, does that mean that the product will be coming from the UK rather then the Australian centre?
Delivery
in Shelby Cobra 427 S/C 1965
Posted
Isn't this model only a pre-order, which isn't even entering production until September?