Jump to content

Bismarck Pack 5 - Stage 50 & 51


Recommended Posts

The main thing here is to avoid the mistake I made. It is to do with the way you attach the red wire to the guns. The wire comes off the circuit board from one side, you can just about see in the images below that the way I attached it has the wire facing down on the cutting mat; this turns out to be 'upside-down'

What I found in Stage 53 is that this orientation means that the wire does not sit well in the turret base and gets a little snagged with movement. So at Stage 53 I had to dismantle everything and reverse the orientation of the circuit board wires (jump down to last pic to see correct orientation).

IMG_0245.thumb.jpg.383c46c3a9ab61c29e691d8e59840040.jpgIMG_0246.thumb.jpg.cc7077dd0fd5ca3f2674547e2081361a.jpgIMG_0247.thumb.jpg.7c57ca5065a88e5c79dd267b298dc13a.jpgIMG_0248.thumb.jpg.69a23ae51f098e628e6e974291d05488.jpgIMG_0249.thumb.jpg.9dc9d0b836419a9129950d187081b5d8.jpg

The correct orientation of the circuit board wires so that they do not hit the turret base when moving:

1259986125_amend1.thumb.jpg.cc5ef6a2b9b4570bf8d01669b2dc2906.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...