250 GTO Pack 4 - Stage 26. Left rear leaf spring.

[Mark, The Master Modeller]

Stage 26 gives us the left rear leaf spring.

Take the front bracket and fit it to the front of the leaf spring.  It's secured with a screw.

THere is an arrow engraved on the spring to indicate which is the front.

Take the rear bracket and fit it to the rear of the leaf spring.

Fit the leaf spring to the bottom of the rear axle.

The leaf spring is secured with a screw fitted in the hole in the top of the rear axle.

Turn the assembly over again and fit the bracket, making sure that the lug goes towards the rear of the axle.

Here's a wider shot for context.

This completes the stage.