Shelby Cobra Pack 5 - Stage 38

[General Lou]

 

The first part of this stage is to fit the piston, I then secured it in place with a pin, tightening with pliers.

 

The pins allow the cylinder to move.

 

Next I worked on the shock absorber, by attaching the lower control arm, again with a pin.

Once completed I then connected the control arm, agin with pins to give it movement.

 

The spring slides on to the piston which then slides into the cylinder that I just added to the chassis. Then the assembly is secured in place with two pins which I needed to use pliers to secure.

 

The wheel slides over the rodent again another pin is used to secure it in place.

 

The first of the front wheels is now in place!