Shelby Cobra Pack 2 - Stage 15

[General Lou]

Stage 15, spark plugs:

 

To start, I screw the oil pan on to the protective plate. Then I screw two screws on to the lugs, as these hold the protective plate in place when slotting into the egine:

 

Next, I screw another 2 screws on to the engine, which act as slots when joining on to another piece. Also I place cooling fluid tank bracket in the engine:

 

Next, the timing belt assembly, gearbox assembly and oil pan come together ready to be held in place by the engine block:

 

Everything comes together with some screws. I had to use a slightly longer screw driver for this part:

 

Now on to the spark plugs. I cut the long piece of wire into the lengths given in the instructions. Then I take the sparkwire connectors, and press them on to the end of each piece of wire:

 

Fibally, I press the spark plugs into the engine block with some pliers, to make sure they are in firmly. Then the wire goes from the spark plug and into the distributor:

Stage complete

[Pierre]

Hello
I build the car from France
do you know how the starter will be put on the engine
thanks

[Pierre]

Hello
I build the car from France
do you know how the starter will be put on the engine
thanks

[Pierre]

Hello

for precision it is about this part which is missing for the moment on the engine:
fundamental part since it is about the starter.