Pack 6 - Stage 44. Rear brakes.

[Mark, The Master Modeller]

Stage 44 gives us the rear brakes.

Take a pair of brake disc rotors, and pair of etched disc surfaces.  Note you need a left and right hand pair of the etched disc surfaces.

Apply the left spiral to one part and the right spiral to the other.

Fix the two halves together with a couple of screws.

Repeat the process to make the second disc, but note that the discs are handed so you need to make a left and right hand pair.

Push the brake piston covers onto the calipers.  The calipers are marked L & R, but the position covers are identical.

Fix the calipers to the uprights with a couple of screws.

Push the brake pipes onto the bottom pin of the piston cover.

This completes the stage.