Pack 6 - Stage 41. Left rear suspension.

[Mark, The Master Modeller]

Stage 41 gives us the left rear suspension.

Fit the lower wishbone to the upright with a couple of screws.  You may need to file off any excess paint for the wishbone to move smoothly.

Fit the shock absorber cylinder to the upright.

Fit the radius arm link to the top of the upright, being careful to get it the right way round.

Take the radius arm and fit the bracket to it with a screw.  Note that the bracket goes on the cranked end of the radius arm, and goes on the outside of the bend.

Finally, take the black bracket and fit it to the chassis.

This completes the stage.