Pack 5 - Stage 31. Left cockpit frame.

[Mark, The Master Modeller]

Stage 31 gives us the left cockpit frame, which is really part of the chassis.

Screw the wiring board to the frame.

Now add the smaller tubular frame to the first bit of frame.  This is secured with just one screw, so be gentle with it.

Fit the sub-assembly in place.  You need to take the front leg and insert it underneath the shock absorber.

Now twist the frame round to its correct position.  The two upper screw holes are connected to the dashboard frame.

Two screws go up from under the main chassis.  This photo shows the front one.  

Finally, the outer arm of this subassembly is screwed to the outer section the main chassis.

This completes the stage.