Jump to content

Pack 3 - Stage 13. Left cylinder head and cam covers.

Mark, The Master Modeller
 Share

Recommended Posts

  • Administrator
Mark, The Master Modeller Power Contributor

Mark, The Master Modeller

Posted
  • Administrator
Posted

Stage 13 gives us the parts to contract the left head.

PB220074.thumb.JPG.62b3fe4c3081c8aa7bb8f271cca44dc3.JPG

Construct the pulley by placing the pulley back not he shaft, followed by the pulley front.  Then secure therewith a screw.

PB220075.thumb.JPG.749f7d034ae97e6ead54252ddc4ff8c8.JPG

Screw this pulley assembly to the intake cam cover constructed in stage 12.

PB220076.thumb.JPG.f99f94109ef1975c81b7c24ed98006d0.JPG

Fit the 12 spark plugs.  AS before, these should be cut from the sprue with sprue cutters, then pushed into the holes in the head.

PB220077.thumb.JPG.1d1280edf4be9c26c51e90dfd0c720de.JPG

Fit the exhaust cam cover to the head and secure with 2 screws.  The cam covers have different sized tabs so they will only fit in the correct positions.

PB220080.thumb.JPG.78eb0be761a568554f0f1a689be83ef2.JPG

Fit the intake cam cover and secure with a couple of screws.

PB220081.thumb.JPG.02e8ccf740e2c81afbf667e65c211d68.JPG

This completes the stage.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...