Pack 3 - Stage 16. Left air filter box

[Mark, The Master Modeller]

Stage 16 gives us the left air filter box and some fuel pipes.

As with the previous air filter box, insert the 3 screws first.  These are a push fit.

Then fit the air filter cover onto the body.

Now we turn our attention to the fuel lines.  Remove the pipe fittings from the sprue and then push the flexible pipes onto the ends.  `Mine were a good fit, but you can put a tiny drop of superglue onto the pin if you want.

Take the right hand cylinder head from stage 15 and push the fuel fittings into the holes in the carbs.  Use the fuel fittings with the shorter pipe.

Take the left hand head and pair of carbs, and fit them together.

Fit the fuel fittings with the longer pipe.

This completes the stage.