Stage 67 - Lifting device gearbox.

[Mark, The Master Modeller]

Stage 67 gives us the parts for the lifting device gearbox.

I suggest lubricating the gearbox with silicone or lithium grease.  It will make the gearbox run more smoothly and quieter.

Fit the three shafts.

Fit the motor.

Fit the camshaft from the underside.  Hold the motor to stop it falling out!

Fit the three gears.  

Fit the large gear to the cam shaft.

Finally fit the cover which is held with clips.  It should clip together easily, but if not, check that the three shafts are properly seated.

This completes the stage.