Jump to content

Stage 64 - Aircraft circuit board


Recommended Posts

  • Administrator

Stage 64 gives us the circuit board for the aircraft.

P9060888.thumb.JPG.171bf8aef6cc60c470e0485a7af31670.JPG

Fit the circuit board in place with 4 screws.

P9060889.thumb.JPG.0b017f70b12a0b763bb32b0d68c2361c.JPG

Now we need to remove the cockpit assembly from the wings.  It van be a bit tricky, but can be made easier by loosening or removing the carb assembly temporarily.  Refit the carb as soon as you've removed the cockpit.

P9060890.thumb.JPG.a22fc67c9fbc9f91a095e3f8639f4052.JPG

P9060891.thumb.JPG.b323f4e0223d2077321b7c104f7d65ab.JPG

Screw the fuselage assembly in place.

P9060892.thumb.JPG.3b235f2f805c4d5395ec2a749926af15.JPG

It's held with 5 screws.  4 here.....

P9060893.thumb.JPG.bb9585fc2e49070bed5e64bc3a87a3a5.JPG

... and one by the flap mechanism.  Make sure the flap gear is properly engaged.

P9060894.thumb.JPG.a320b426964c0d32ddefc8bee932c0b9.JPG

Plug in all the cables, matching the identifications on the plugs to those on the circuit board.

P9060895.thumb.JPG.227db9e8cc68624fd0f27283560db688.JPG

The cables should be nice and tidy!  (Easier said than done - but do your best as untidy cables may stop the bodywork fitting properly.)

P9060898.thumb.JPG.91ad3ad7578a47c7c0893bca2f5ab56a.JPG

I fitted the rear cables in the clip, like this.

P9060897.thumb.JPG.b639043fa532b1b7b7490800505d357f.JPG

Refit the cockpit.

P9060900.thumb.JPG.17e7bcf95b03f896b18297fc2c36590a.JPG

Finally, fit the gear cover to protect the flap gears.

P9060899.thumb.JPG.6c5a7d4c49ae88f2ae9a778938895468.JPG

This completes the stage.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...