Mark's Leopard 2A6 - Pack 4 (2)

[Mark, The Master Modeller]

Stage 26 gives us the armour on the other side.

However, first we take the storage bins from stage 14....

.... and fit them along with the fixing details supplied in this pack.  A drop of superglue holds everything together.

Note that the underside clips in like this.

Now remove the gun elevation servo and fit this little collar.

Then replace the servo.

The assembly of the armour is the same as stage 25.

Now fit the metal deck support that was assembled in stage 24.  This is held with 3 screws and 3 spacers.  Make sure you don't trap the wires for the lights.

Stage 27 gives us more of the deck armour.

Now we fit the light from stage 19 and the tow hook.  These are fitted to the armour that will be fitted to the front of the deck.

Now add the deck armour round the left side of the turret.  This is just held with one screw for now.

Add the details to the mudguard.  I'll be honest, I have no idea what these are!

Stage 28 is the armour for the other side of the turret.

Firstly, we add the light and tow hook.

Then the armour.  We fit 5 screws and collars to completely secure both sides of the armour now.

And finally add the mystery details.