Jump to content

Improving the fit of the door parts by moving the magnet


Michael Colin

Recommended Posts

I just started phase 2 and noticed the inner and outer door parts don't fit as flush as they reasonably should. I discovered that while the magnet on the outer door is situated right between the two lower posts, on the inner door there is a magnet sized recess located a touch higher than the post holes. When trying to fit the parts together, the magnet exerts pressure on the raised edge of the recess resulting in a wibbly wobbly fit for the whole thing.

I've removed the magnet from the outer door and transfered it to the inner and now things fit so perfectly together you couldn't fit paper between them. Don't even need to glue them.spacer.png

spacer.png

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...