T-800 Terminator Pack 2 - Stage 18

[General Lou]

Stage 18, Eye motor support:

 

The black bar part here is from stage 01. I place the holes at each end onto each eye:

 

Now I screw the eye motor support on with 2 black screws. The two pointy out bits should be at the bottom:

 

I attach the motor with two screws onto the pointy out bits from the previous step. Make sure the motor is the correct way up. The right image is me putting it in the wrong way:

 

The face attaches to the lower jaw and neck with three screws:

 

Stage complete